Product Details
Place of Origin: sichuan
Brand Name: Xidao
Certification: SAE J1772
Model Number: XD-DC-960KW
Payment & Shipping Terms
Minimum Order Quantity: 1
Price: negotiate
Packaging Details: Wooden case packaging
Delivery Time: 15-30 work days
Payment Terms: L/C, T/T
Supply Ability: 5000 per month
Model: |
Liquid-cooled Charging Stack |
Total Wattage: |
960kw |
Output Current: |
0～1000A |
AC Input Voltage: |
380VAC |
Power Factor: |
≥0.99（50%P Above Input Condition） |
Efficiency: |
≥96%（Peak Efficiency） |
Measuring Method: |
DC Ammeter Measuring（Precision Grade: 0.5） |
Cooling Method: |
Forced Air Cooling + Liquid Cooling |
Protection Grade: |
IP54 |
Model: |
Liquid-cooled Charging Stack |
Total Wattage: |
960kw |
Output Current: |
0～1000A |
AC Input Voltage: |
380VAC |
Power Factor: |
≥0.99（50%P Above Input Condition） |
Efficiency: |
≥96%（Peak Efficiency） |
Measuring Method: |
DC Ammeter Measuring（Precision Grade: 0.5） |
Cooling Method: |
Forced Air Cooling + Liquid Cooling |
Protection Grade: |
IP54 |
960KW Split Liquid-Cooled Super DC Charging Stack CAN Communication/PLC (Customized) OCPP
Application Scenarios
With the continuous development of the new energy vehicle industry, new energy vehicles will be fully applied to buses, cabs, freight vehicles, and postal vehicles. The proportion of new energy vehicles, such as heavy-duty cargo vehicles and engineering vehicles, is also on the rise. The range of domestic vehicles is also increasing, and the charging efficiency of charging piles is also putting forward higher and higher requirements.
At present, the GB20234.3-2015 standard specifies the charging gun, the matching cable outer diameter is about 40mm, the soft core cross-sectional area is 70m㎡, and the nominal maximum bearing capacity is 250A. However, in the actual use process, the heat generated by the cable copper wire cannot show good heat dissipation, and for the safe operation of the whole charging system, the charging pile control system will limit the charging current according to the temperature To enable stable operation.
To keep up with the growing demand for pure electric vehicles, the construction of high-power DC charging piles has become a mandatory requirement, with an output current between 300A-600A so that high-power pure electric vehicles can be fully charged in 15-20 minutes. Ordinary charging piles cannot meet this technical requirement.
Liquid-cooled super charging pile, equipped with a liquid-cooled charging system, adds a liquid-cooled charging gun, liquid-cooled cable, cooling module, and other systems. With the control cable outer diameter of 39mm, high current charging of 600A and even 800A can be achieved. The temperature is controlled below 55℃, which is safe and light to achieve the purpose of fast charging of large electric vehicles.
Technology Parameters
| categories | Items | parameters |
| Environmental conditions | Working Temperature | -20℃～＋55℃, above 55℃ need to reduce the amount of use |
| Storage temperature | -40℃～＋70℃ | |
| Relative humidity | ≤95%RH, non-condensing | |
| Cooling method | Forced air cooling | |
| Altitude | 2000m, above 2000m need to be used at a reduced rate | |
| Atmospheric pressure | 79kPa～106kPa | |
| AC Input | AC Input Voltage | 380VAC |
| AC Power Frequency | 50Hz | |
| DC Output | Voltage range(V) | 200 ~ 1000 |
| Constant power range(V) | 300～1000 | |
| Precision of voltage stabilization | ≤±0.5% | |
| Precision of current stabilization | ≤±1% | |
| Ripple RMS coefficient | ≤±0.5% | |
| Ripple peak coefficient | ≤±1% | |
| Output voltage error | ≤±0.5% | |
| Output current error | ≤±1%; When the current is less than 30A, the error is ≤0.3%. | |
| Efficiency of the whole machine (%) | ≥95 | |
| Soft start time (S) | 3~8 | |
| Standby power consumption (W) | ≤0.3‰ output rated power | |
| Insulation | Insulation Resistance(AC1000V)(MΩ) | ≥10 |
| Dielectric strength (AC2500V) | 1 min No breakdown or flashover | |
| Protection | Protection contents | Overload protection, Overvoltage protection, Under voltage protection, Short circuit protection, Overcurrent protection, Overheat protection, Battery anti-reverse connection protection |
| Whole machine | Total power (kw) | 960kw |
| Number of mounted terminals (units) | 1 liquid-cooled MCS (1000A) single-gun terminal +4 GB DC (≥500A, max. 600A) liquid-cooled single-gun terminals +2 sets of CCS1+CCS2 DC (≥200A, max. 200A) double-gun terminals (double-gun interlocking) |
|
| Other | Protection Level | IP54, IP55 at gun mount connection |
| Communication mode | RS485, CAN, Ethernet, 4G (Full Network) | |
| Installation | Floor-mounted | |
| Noise (dB) | ≤65 |
About us
Chengdu Xiangdao Technology Co., Ltd. is a company specializing in the overall solution of development, design sales and operation of new energy, including electric vehicle charging piles, fast charging stations, solar photovoltaic power generation systems, solar application products, etc..
We are committed to providing total solutions for the application of new energy technologies.
In the future, we will continue to focus on the application of new energy technology, operate with integrity, and work hard to create a green world.
video
video
video
